Welcome to visit: Jinan Funis Welding Technology Co., Ltd. website, specializing in automatic scaffolding welding machine, intersecting line automatic welding machine, ring seam welding machine
Service Hotline

Pipe Butt Girth Welding Machine

Jinan Funis Welding Technology Co., Ltd. is a high-tech enterprise specializing in the development, design, manufacturing and technical service of automatic welding equipment in China. Its main products are automatic welding equipment such as automatic welding machines, welding positioners and welding roller frames.
0531-85972807 Consulting Hotline: 0531-85972807
Pipe Butt Girth Welding Machine
HFH-160 Pipe Butt Girth Automatic Welder
I. Product Design Features Overview and Parameters
1. Product use:
The special seam welding machine is mainly used for butt jointing of the outer seams of pipes. It has the characteristics of accurate positioning, simple operation, good welding formation, and beautiful seams.
2. Equipment performance parameters:
Maximum clamping diameter: φ20—φ160 mm
Applicable workpiece length: 100—1000 mm
Workpiece wall thickness: 1.5-7 mm
Swing diameter: 350 mm
Workpiece rotation speed: 0.24-8 rpm
Effective adjustment of welding torch: 150 mm
3. Equipment applicable workpiece conditions and working environment:
Working conditions
Ø Ambient air temperature range: -25 ℃ ~ 40 ℃
Ø Relative air humidity: when the average daily temperature is not greater than 25 ℃, the average maximum relative humidity in the wettest month is 90%
Ø Grid voltage fluctuation: within ± 10% (when grid frequency is rated value)
Ø Frequency fluctuation of power grid: ≤ ± 1% (when grid voltage is rated value)
Working environment
The equipment should be placed in an explosive or corrosive industrial gas, water vapor, salt spray and chemical deposits without serious hazards or affecting the normal use of the equipment, and should be kept away from severe vibration or bumps.
Installation and commissioning
Site conditions
It should have 380V AC power supply and smooth and solid cement floor. The plant should be dry and free of corrosive gases.
2. Installation
① The equipment is strictly prohibited to overturn and invert
② Before using the equipment, the ground wire must be connected to the "grounding mark"
③ When lifting the workpiece, violent lifting is strictly prohibited to prevent damage to the frame and other internal components. It may also cause the equipment to overturn if the machine base is not fixed!
④ Fix the equipment with expansion bolts
3. Commissioning
① Carefully check whether the above installation content is correct and firm
② Turn on the power and test whether the rotation direction of the motor is correct and whether the transmission mechanisms are flexible and stable.
Updated: 2013-5-31
Related Products

relevant information

contact us

Jinan Furness Welding Technology Co., Ltd.


Fax: 0531-85996739

Contact: Manager Zhang

Sales: 15906675528

Email: jnankenbi@163.com

Address: No. 3, District 4, Huanggang Industrial Park, Jinan City

online service

Scan code to communicate with me
电玩城游戏大厅 沙巴体育平台 内蒙古快三历史开奖结果 电子捕鱼平台 胜博发娱乐游戏 网上棋牌手游大全 开元赌场官方 九五至尊网站是多少 中文电子游戏官网 最火的捕鱼游戏